HYD-PS13H Earth Drill (Honda GX390 Engine) Two-Man Handle

Below is a parts diagram for the Two-Man Handle used in the Little Beaver HYD-PS13H Earth Drill, followed by links to every OEM replacement part available.

Part Diagram Hose, Valve to Power/Valve to Return for METRO Valve - Little Beaver 30102-A Quick Disconnect, 3/8 Quick Disconnect, 3/8 Little Beaver Hose - Valve To Motor - 24 Little Beaver Hose - Valve To Motor - 22-1/2 Little Beaver Fitting - 06U-608 630Vsae - 37 Deg (Jic) Fem Swivel 90 Degree Street Elbow Adapter 5502-8-6 - Little Beaver 30287 Metro Valve #D10M2 with Relief at 2700 PSI - Little Beaver 30275 Little Beaver Metro Valve Seal Kit #830-00-001 - 30275-2 Cap Screw 1/4 Nut, KEP NC, 1/4 Standard Flat Washer, 1/4 Cotter Key 3/32 Throttle Lever - Little Beaver 30180-A Two Man Handle, Spider Only, Plate for 2-Bolt Flange - Little Beaver 30190 Socket Head Cap Screw (5/16 Hose Clamp - Little Beaver 30183 Pushnut Locking Washer - Little Beaver 30188 Nut, KEP NC, 5/16 Motor, Char-Lynn #101-1040, 60 rpm, 24 cubic inch 2-Bolt Flange - Little Beaver 30278 Adaptor, with Hardware, Keyed Shaft to Auger Adapter with Button - Little Beaver 30272 Handle, Hose Anchor, 18 Throttle Linkage, 3/16 Handle, Throttle Mount, 18 Bare Handle, 18 Bolt, Hex NC, 5/16 Hose Clamp Spacer 5/16 Button Shield - Little Beaver 9058-1 Nut, Hex, 1/2 Little Beaver Replacement Woodruff Key (1/4 Handle Grip for Two Man Handle - Little Beaver 30194 1/4 Washer, Williams, 3/8 Washer, Split Lock, 1/4 Little Beaver Seal Kit, Char-Lynn S-Series (-008, -009, -010) - 30162-D Socket Head Screw, NC, 1/4