Towable Hydraulic Earth Drill Spine & Valve Assembly

Below is a parts diagram for the Spine & Valve Assembly used in the Little Beaver Towable Hydraulic Earth Drill, followed by links to every OEM replacement part available.

Part Diagram Spine - Little Beaver 37022 Wheel Assembly (Includes Bearing, Seal, Cap) - Little Beaver 37004 Wheel Assembly (Includes Bearing, Seal, Cap) - Little Beaver 37004 Axle Only - Little Beaver 37001 Tank to Pump Hose - Little Beaver 37162 Hose Assembly, Valve to Tank - Little Beaver 37157 Little Beaver Metro Valve Seal Kit #830-00-001 - 30275-2 Angle, Neck Lock - Little Beaver 37082 Filler Breather Cap - Little Beaver 37165 Neck Lock Screw - Little Beaver 37085 Knob, Handle - Little Beaver 37088 Adaptor, 9/16 x 3/4 SAE O-Ring 6410-6-8-0 - Little Beaver 37155 1/4 Pin, Clevis 3/16 x 3/4 Plated - Little Beaver 37171 Clevis, 9/16 Hex with 5/16-18 Threaded ID - Little Beaver 37138 (replaced Little Beaver KT033) Zinc Plated Nut, 5/16-18 - Little Beaver 3002-D Cotter Key 3/32 Nut, NC Slotted 1/2 - Little Beaver 37134 Bolt, Hex NC, 1/2 x 1-1/2 Plated GR 5 - Little Beaver 30408 Pin, Ball Lock with Ring, 3/8 - Little Beaver 37181 U-Bolt, 1/2 x 4-1/4 Legs - Little Beaver 37133 Cotter Key, 1/8 Cap Screw 1/4 Bushing, 5406-12-8 - 3/4 Male x 1/2 Female - Little Beaver 30282 Hose Clamp, #5712 - Little Beaver 30270-3 Bolt, Hex, 5/16 Bushing, 1 Nut, Hex, 1/2 Flat Washer, #10 Zinc Plated - Little Beaver 4033-1 Hose Assembly, Valve to Motor Right JIC 39 1/2 Hose Assembly, Valve to Motor Left JIC 41 1/2 Roll Pin, 3/16 Metro Valve #D10M2 with Relief at 2700 PSI - Little Beaver 30275